[Contents] [Prev] [Next] [Index] [Report an Error]

path ds3 t1 snmp trap link-status

Syntax

[ no ] path pathChannel ds3 ds3Channel t1 t1Channel [ /subchannel ]
snmp trap link-status

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Enables SNMP link status processing for a T1 channel group or subchannel on a DS3 signal. This command applies to a T1 channel or subchannel on a DS3 over channelized SONET interface. The no version disables SNMP link status processing for a T1 channel.

Options

pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the DS3 channel
t1Channel—One or more individual T1 channels, ranges of T1 channels, or combination of individual channels and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27
subchannel—Fractional T1 interface, in the range 1–24

Controller Configuration

[Contents] [Prev] [Next] [Index] [Report an Error]